EasyCare Easyboot Glove 50
*WARNING* - Small Application tool included in box when shipped, beware it is easily lost and there are NO replacements.
The Easyboot Glove 50 is built on the Easyboot Glove shell but replaces the fabric gaiter with a urethane heel sling covered in neoprene. The Glove 50 is easy to apply and remove. If you've previously used and liked the Glove Soft hoof boots, which are designed to be a lightweight, low-profile boot that clings to the hoof to keep debris out, even in sandy and muddy conditions, you should consider trying the Glove 50.
Easy to apply and remove. If you can get the Fit Kit shell on your horse, you can apply the Easyboot Glove 50.
It stays on very well for the most aggressive riding conditions: riding in challenging terrain, at speed, and in muddy conditions.
It’s easy to check your fit. Simply order the Fit Kit to determine if the Easyboot Glove 50 will work on your horse.
All parts are easy to replace if needed.
Sold
Individually
PRICE IS PER BOOT.
We have found that measurements are more accurate and easier to take using the metric system.
Easyboot Glove 50 Application
After a fresh trim, measure the width of the
hoof across the bottom at the widest point.
Measure the length of the hoof from the toe to
the buttress line of the heel. The buttress line is the farthest weight bearing
point of the heel where the hoof wall ends. Do not include the heel bulbs in
the measurement.
Compare your measurement with the appropriate
size chart. Please note that each boot style has its own unique size chart.
Ideally, the length and width measurement will
fit into the same size. If the length and width measurements indicate different
sizes, select the larger size. If the width and length measurements are
different by more than one size, your selected boot style is not
recommended.* Be sure to check your measurements against an alternative
boot in the EasyCare line�another style may accommodate your horse�s hoof shape
better.
*Note: If you are fitting an Easyboot Glue-On or Glove, width and length
must fall into the same size category.
