We have found that measurements are more accurate and easier to take using the metric system.
Width in mm
Length in mm
After a fresh trim, measure the width of the
hoof across the bottom at the widest point.
Measure the length of the hoof from the toe to
the buttress line of the heel. The buttress line is the farthest weight bearing
point of the heel where the hoof wall ends. Do not include the heel bulbs in
Compare your measurement with the appropriate
size chart. Please note that each boot style has its own unique size chart.
Ideally, the length and width measurement will
fit into the same size. If the length and width measurements indicate different
sizes, select the larger size. If the width and length measurements are
different by more than one size, your selected boot style is not
recommended.* Be sure to check your measurements against an alternative
boot in the EasyCare line—another style may accommodate your horse’s hoof shape
*Note: If you are fitting an Easyboot Glue-On or Glove, width and length
must fall into the same size category.
The Easyboot Glue-On is perfect for:
* Pack trips
* Multi-day rides
* Endurance events
* Competitive trail rides (Most CTR's do not allow boots that come above the coronary band.)
* Speed events, such as barrel racing
* Any circumstance where the presence of hardware is a concern